How to go from Orange to Blue Hair [At Home]

You have orange hair either because it was the hair color you already had on or you’ve bleached your hair, and your hair fully didn’t turn blonde.

Now you really, really want blue hair.

I get it. I feel you.

It looks absolutely gorgeous, and if I were to dye my hair right now, I wouldn’t do any other color.

You’ve seen many pictures and are convinced that blue is your color.

However, there are many things you need to know and consider before you go from orange to blue hair.

Dying (if not done properly) can really damage your hair or, worse – not get you the color you want.

So, you need to do it step by step, be patient, and use really good products if you want to see good results.

Please note that this process is long and time-consuming, but will ensure you get the best results with the least damage. That’s what you need to aim for when coloring your hair.

This is a detailed guide you should read once before following the instructions. Please bookmark it so you can keep returning to it to read it.

Let’s begin.

I’ll just answer some questions first before I get into the process.

This post contains affiliate links, meaning I may make a commission at no extra cost to you if you decide to click on a link and purchase something. Click here to read the full disclaimer.

What happens if you put blue hair dye on brassy hair?

There is color theory involved here.

If your hair is very orange/fiery orange, the blue will not sit on top of the orange and coat your hair blue.

No.

The blue will neutralize the orange tones in your hair, and the resulting shade will be a bright green. Let’s pull up the color wheel and look at it really quickly.

Notice how blue and orange are on the opposite ends of the wheel – this means they neutralize each other, and you’ll get the color between them – that’s emerald green.

The only way you can get blue hair or blue-colored hair is to lift the orange color or bleach it so you get very light, platinum blonde.

Then the blue is going to show properly.

If you have too much yellow in your hair – that could make the blue more turquoise or teal.

So, you are aiming for a neutral platinum blonde color.

Is orange a hard color to remove from hair?

Unfortunately, yes.

Red or orange color molecules don’t lift easily – not like blue or purple molecules.

The red and orange molecules are larger and, therefore lift out of your hair last, unlike the cooler shades like blue, purple, or lilac.

So, there is a good chance that the home methods won’t work and may only lighten your hair to a lighter orange or a brassy look.

You can use color remover Oops or you can go ahead and bleach your hair.

What do you need to dye your hair blue from orange?

In this post, I will discuss how to dye orange hair blue.

These are the products we will be using:

• Lightener powder (this is one of the best powders with the least damaging effects for bleaching)
• 30% developer (for bleaching)
• A bleach applicator set (includes a bowl, gloves, tint brush, hair clips, etc., for your hair coloring and dying process)
• L’Oreal Paris Toner (to color correct your bleached hair before coloring it turquoise)
• Manic Panic Poseidon(super vibrant, pigmented, and very beautiful) if you want turquoise, or Manic Panic Periwinkle if you want some lilac shades in there. You can also mix different shades to get something you like.

Can I dye my hair blue without bleaching it?

Unless your hair is very light blonde or platinum blonde, you will have to bleach your hair to dye it blue.

If you have dark hair, then the blue color won’t be heavily pigmented.

Blue is a really bright shade, so you need to pre-lighten or bleach your hair to get the color to look vibrant and pigmented.

How many jars of Manic Panic do I need to dye my hair?

If you have short hair, you only require 1 jar.

If you have shoulder-length hair, you need 2 jars.

You require 3 jars if your hair is to the small of your back.

Step 1: Prep your hair for bleach

1. Here are the materials you will require

• Cream hair bleach

You will also require additional products or a bleach applicator set that includes:

• Gloves
• Bleach applicator brush
• Bowl
• Hair clips
• Plastic cap

If you don’t want to get these items individually just get the whole bleach applicator set here.

2. Don’t wash your hair

Please don’t wash your hair before bleaching it because

• Washing your hair causes little abrasions on your scalp (this will make bleaching very painful because the bleach will penetrate those scrapes and burn your scalp).
• You will have sebum buildup (oil generated from the glands in your scalp when you don’t wash your hair) that will protect your hair from the damage of bleach.

It’s alright if you have products in your hair like moose, gel, or cream. Bleach is pretty strong and will go through those products to get to your hair cortex (the center layer of your hair strand) – no problem.

3. Ensure you don’t make a mess

Please wear an old tee shirt when you bleach your hair.

Bleach will get everywhere.

Put down some old towels and make sure you cover your counter with plastic to make sure you don’t get it on your furniture either.

4. Detangle your hair properly

Make sure you brush your hair and remove all the knots and tangles before bleaching.

You cannot bleach tangled or knotted hair, the bleach is not going to distribute evenly to all your hair strands.

If you don’t detangle your hair before bleaching, you are going to end up with weirdly colored spots and dark sections.

5. Separate your hair into sections

Now, using a comb, separate your hair neatly into 4 sections.

This will ensure that you can focus on 1 section at a time and get good coverage.

How to section your hair properly:

• Using a comb, divide your hair into sections by running the comb in the middle of your hair from the forehead to the nape of your neck.
• Next, divide each section into 2 more sections by running the comb horizontally in the middle.
• Clip the sections using these hairclips. This will make it easy for you to section your hair and focus on 1 section at a time.

Now, since your hair is dark brown or black, you will have to bleach 2 times to lighten your hair and get it to become a light blonde.

Step 2: Mix the bleach and developer

You need to be very careful and follow instructions carefully on the packet.

You want to lift the brown or black hair color molecules from your hair with minimal damage.

Every lightener is different in terms of mixing, so please read the instructions to see what ratio you need to mix the developer and lightening powder in.

This will help you get the best results.

Make sure that the powder is probably mixed in with the developer. You don’t want any granules in the mixture.

Please use a lot of lightener – read people’s reviews to see how many packets they used for their length of hair – this will give you an approximate idea if you need to go in with 1-2 packets.

It’s okay if you have extra but you cannot afford to have less product. This will result in splotchy hair or hair with color in it.

Step 3: Apply the bleach and lightener to your hair

Put on your gloves because you don’t want to get bleach on your skin.

Apply vaseline to your hairline and neck so the bleach doesn’t burn your skin even if it spills onto your forehead and neck.

You will start with the back two quadrants of your hair first.

Start with the mid-lengths and tips first – not the roots.

Make sure you apply a generous amount to coat the hair evenly like this.

You will want to take a little hair at a time and coat the lightener on properly.

Do not color the roots first because the heat from the scalp will bleach them much more quickly. So, please color from the mid-lengths till the tips and wait for about 10-15 minutes.

Once you’re done with the back quadrants, do the front quadrants.

After 15 minutes of coloring the whole hair, you will notice that your hair is starting to lighten.

Now, you can go in and color the roots.

Make sure that you do not bleach your scalp; otherwise, it’s going to burn your skin. Be very careful.

Spray water gently on your hair and cover it with a plastic bag. The water will steam in your hair, and the moistness will help the developer work better.

Leave the bleach on for 45-60 minutes. Please read the box to make sure that you’re doing it correctly.

Bleach doesn’t work after an hour. It has no effects since it completely dries up.

You will want your hair to look almost platinum-like this:

If your hair is still orange, leave the lightener on longer.

Please keep evaluating your hair every fifteen minutes. If you stretch a strand where it breaks too easily, then you will want to take the lightener off.

Step 4: Wash your hair

Ensure you use lukewarm water (not cold) to rinse the lightener off your hair.

Your hair has expanded and is very delicate. If you use cold water, it will damage your hair at this point.

So, make sure you use warm water.

Do not scrub your hair or massage your scalp vigorously because your hair is fragile.

Be very gentle and wash your hair at least 2 times to get it all out.

After washing your hair, please evaluate your hair again.

Step 5: Tone your hair

If you color your hair turquoise when your hair is light yellow, you will get a teal color (that’s more green). Because yellow + turquoise = teal.

If you want a blue that’s more towards blue or indigo, you will need to tone your hair to make it more platinum blonde. Because white + blue = blue

Please don’t box-dye your hair platinum blonde. Your hair is fragile due to the bleaching and will get damaged or worse, fall off.

So please use a toner.

Toner will sit on top of your hair cuticle. It won’t damage your hair at all and will actually make it look healthy and strong.

Now to choose the right toner, you must understand a tiny bit of color theory.

The job of a toner is to take your hair looking from yellow blonde to a more neutral blonde. It tones your hair.

Please read more about how toner works here if you need to understand it.

But when choosing a toner, you must cancel out the shade in your hair to get a neutral shade.

So, if your hair is more orange, you need to use a blue toner. To help you understand what color toner you need to use, simply use the opposite color on the color wheel.

So, if your hair is more yellow, you would need a purple toner. You can simply use a toner like this to get your hair looking less brassy to more white.

Please follow the instructions inside the Toner box, as every Toner has a different application method.

Once your hair is toned, it will be ready for color application.

Step 6: Color your hair

1. Rinse your hair and blow dry it

After toning your hair, you must rinse it thoroughly and get rid of the toner before blow-drying it.

Your hair needs to be bone dry before you color it.

Blowdrying your hair will also make it very porous, and this will absorb the color better and make it look more vibrant and beautiful.

2. Gather your colors

For coloring your hair blue, I highly recommend these:

Manic Panic Poseidon(super vibrant, pigmented, and very beautiful) if you want turquoise or Manic Panic Periwinkle if you want some lilac shades in there with the blue. Or you can mix a little Manic Panic Atomic Turquoise if you want some green shades in there as well. You can also mix different shades to get something you like.

Once your hair is platinum blonde, you can now go ahead and color your hair almost any color you want.

3. Apply the color to your hair

Put on your gloves and apply the color evenly to your hair using a tiny brush.

Ensure you wear an old tee shirt so you don’t ruin your good clothes.

Use a lot of the color so that you don’t have any spots and you’ve covered all of your hair.

Comb through your hair to ensure it coats every hair strand.

4. Cover with a plastic bag

After you’re sure your whole hair is colored, cover it with a plastic headwrap and blowdry a bit over the wrap to heat your hair.

It will help the hair absorb the color better.

Leave it for 45 minutes.

5. Rinse off the color

Rinse off the color in cool water, and don’t use any shampoo when rinsing.

Style as required.

And you’re done!

You’ve just dyed your blue from orange.

Enjoy.

Frequently Asked Questions

Can I dye my hair blue without bleaching it?

As I said before, if you have orange hair, you need to bleach it and lift the dark color molecules off your hair so that you can color it another brighter color.

Turquoise, pink, or blue won’t show properly on orange. It might show on blonde hair, but the tone will differ based on the hair type.

How light does my hair have to be to color it teal or turquoise?

Your hair has to be light blonde or platinum blonde.

If your hair is more yellow blonde than platinum blonde, the turquoise shade will look more teal (more greenish hue) due to the underlying yellow color in the hair.

This is why you need to tone your hair with toner to get the proper turquoise shade.

How long can you leave manic panic atomic Poseidon in your hair?

You can leave it for up to 45 minutes in your hair.

Apply the Manic Panic color onto your hair when it’s bone dry. After application, cover your head with a plastic cap and blowdry over it. This will make absorption easier as your hair strands become more porous.

Rinse with cool water afterward and dry your hair naturally or with a blowdryer.

Is turquoise hair hard to maintain?

It depends on multiple factors:

If you go out in the sun a lot, wash your hair a lot with shampoo or use many hair products, it will lighten considerably with a few washes.

If you have bleached and toned your hair well, it will easily last 3 months minimum before you do a touchup.

You have to condition your hair a lot when you color your hair.

I highly recommend John Frida’s Purple Shampoo and Conditioner. Both of these will give you that salon-worthy colored hair.

Is it easy to remove blue from your hair?

Blue tones are not difficult to remove from hair. But I do have a post that explains how you can remove turquoise/blue color from hair with the least amount of damage.